GYD9CB71 Strobe light with five different flash patterns. Selectable position light with dynamic activation (yellow-orange or xenon white, connect the color of your choice) Range in E-approved mode: 359 m (1 lux) Range in Powerboost mode: 647 m (1 lux) Driving beam pattern: Enhances the vehicle's standard high beam pattern 11,500 lumens (theoretical), 8,200 lumens (actual) Neutral white light: 5000K ETM (Electronic Thermal Management): Adjusts diode power based on temperature for optimal lifespan Side-reflecting optical system Pressure equalization membrane Aluminum heat sink Adjustable stainless steel mount Polycarbonate lens Technical data: 150W (10 x 15W Cree LED), strobe lights 20W (4 x 5W LED) IP69K (water and dust proof) Cable with 6-pin DT Connector Voltage: 9-36 V Load in E-Approved Mode: 2,2A @ 12V and 1,1A @ 24V (high beam only, no position light) Load in High Beam Powerboost Mode: 10,6A @ 12V and 4,8A @ 24V (high beam only, no position light) Dimensions & Weight: Width: 247 mm Height: 145 mm (incl. bracket) Depth: 86 mm Weight: 1,6 kg Included: One light+ Strobe LED auxiliary light 10" Mounting bracket, bolts, and screws for single or dual mounting points DT Connector (6-pin) Cable instructions Red: Auxiliary light (+) Black: Auxiliary light / Position light (- Ground) White: Position light (+) White light Yellow: Position light (+) Yellow-orange light Green: Strobe light (+) Blue: Synchronization & pattern (+) Brown: Alternating (+) INQUIRY PRODUCT DETAIL LED Strobe Auxiliary Light 10" Share: PREV: GYD9CC80 NEXT: GYD9ES48B RELATED PRODUCTS GYD9CW10 GYD9CS48B GYD9CR24B GYD9IS36B GYD9HS36B GYD9BS48B GYD9ES48B GYD9CC80